An access control with PoE (Power over Ethernet) to manage a single fully supervised door.
Product Description:
The modular design and scalable architecture enables an installation to start small and expand as needed, from a single controller system to a larger, multi-site enterprise environment. The controller is designed for use with the Hirsch Velocity security management system, uTrust TS Readers and secure keypads, or wireless door locks.
Product Features:
- Controls one (1) fully supervised door with entry and optional exit keypads/readers or eight (8) wireless door locks
- Scalable from single controller to networked multi-site installations
- Multi-microprocessor architecture with dedicated crypto- processor
- Integrated network communication with onboard 10/100/1000 Ethernet IP port
- Auxiliary/alarm relay output
- Integrated hardware encryption with enabled devices
- High-security supervised alarm inputs
- Configurable relay outputs (door or general purpose)
- Open Secure Device Protocol (OSDP)
- ScramblePads, TS Readers, and third-party OSDP readers (i.e., Veridt Stealth Series)
- Reader LED and buzzer control
- Extended cable runs
- Entry/exit reader setup
- Supports Wiegand readers
- Global I/O
- Firmware can be updated through Velocity
- Powered at the edge by PoE+ or external power supply
- Special circuitry to protect reader/relay terminals from excessive current draws
- Supports a wide variety of readers and credentials
- Built-in protection from door strikes and mag locks that generate large inrush current demand during power-up and large induced current demand during power-down
Technical Specification:
| COMMUNICATIONS | |
| Serial Interface Ports | Controller to controller:• RS-485 multi-drop protocol (X*NET2, X*NET3)• Up to 4,000 ft (1,200 m) with 22 gauge, 2 pair, stranded, twisted, and shielded |
| OSDP Protocol | Controller to reader:• Buzzer, LED, and optional secure OSDP• Single port for entry and exit readers• Up to 4,000 ft (1,200 m) with 18 gauge, 2 pair, stranded, twisted, and shielded |
| Wiegand Protocol | Onboard Wiegand:• Industry standard Wiegand• Reader ports: 2 (1 entry port and 1 exit port)• Maximum wiring run: 500 ft (150 m) with 18 gauge, 2 pair, stranded, twisted, overall shield |
| FIRMWARE | |
| Command and Control Module (CCMx) | • Flash upgradeable• Time zones: 150• Door groups: 128• Control zones: 256• Holiday schedules: 4 (366 days x 2 years)• Daylight savings time adjustment |
| SNIB3 | • Flash upgradeable with signed and encrypted firmware• FIPS AES 256 encryption• TLS 1.2 Encryption (Requires Velocity 3.7 SP2 or later)• 10/100/1000 Ethernet (TCP/IPv4 or v6) |
| MEMORY | |
| Buffers | Standard: 1,500 events and 1,500 alarms |
| Credentials | Up to 500,000 |
| Memory ProtectionBattery | 10 days for code, setups, clock, and buffers |
| PHYSICAL | |
| Security | Cover opening tamper switch |
| Enclosure | Flame retardant plastic enclosure with exposed connectors and diagnostic LEDs |
| Dimensions | 1.25 x 8.0 x 8.0 in (3.18 x 20.32 x 20.32 cm) |
| Weight | 1.5 lbs (0.69 kg) |
| OperatingTemperature Range | 32° to 140°F (0° to 60°C) |
| Relative Humidity | 0 to 90%, non-condensing |
| ELECTRICAL | |
| OSDP Keypad/ReaderPower (1 Terminal) | 750mA at 12V (up to 2 readers) |
| WiegandKeypad/Reader (2Terminals) | 750mA at 12V |
| Power Supply | PoE+ 802.3at Type 2 or UL-listed 2.0 A switching power supply at 110 – 240VAC and 50/60 Hz providing 24V – 28VDC power |
| Door Relay | • Dry 2A at 30V• Wet 750mA at 24V |
| Auxiliary Relay | • Dry 1A at 30V• Wet 750mA at 24V |
| Listings and Approvals | • UL 294: Access Control Systems Units• UL 1076: Proprietary Burglar Alarm Systems• CE and UKCA |