An access control available in 4 and 8-door models. It is designed for use with the Identiv Connected Physical Access Manager (ICPAM).
Product Description:
Identiv’s Hirsch Mx Controller is available in four (4) and eight (8) door models with each door fully supervised. The modular design and the scalable architecture of the controller enables an installation to start small and expand as needed, from a single controller system to a larger, multi-site enterprise. Mx Controllers are the core of Identiv’s physical access control solutions. These controllers are designed for use with the Identiv Connected Physical Access Manager (ICPAM) solution and uTrust TS Readers. A range of models and expansion options in the Mx product line provide a variety of access control, high-security alarm monitoring, and relay control outputs.
Product Features:
- Controls 4 or 8 fully supervised doors with entry and optional exit keypads/readers and is field upgradeable
- Multi-microprocessor architecture with dedicated crypto-processor
- Integrated network communication with onboard Ethernet IP port
- Dedicated alarm relay outputs
- Integrated hardware encryption with enabled devices
- High security supervised alarm inputs
- Configurable relay outputs (door or general purpose in ICPAM)
- Bay for up to 4 expansion boards:
- Memory (up to 132,000 users)
- Alarms expansion (maximum 4)
- Relays expansion (maximum 5)
- 256 bit encryption and TCP/IP version 6 support for the network communication board
- MATCH protocol, allowing for an added 1,800 ft of wiring from the panel to the MATCH Board, plus entry and exit readers:
- MATCH2 interfaces
- Extended reader cable runs
- Entry/exit readers operate over the same data cable, minimizing installation costs
- MATCH encodes card number data for enhanced security over Wiegand messaging
- Wiegand setup and entry reader connectivity for each door
- Controller peer-to-peer device I/O using RS485
- Available with either Match or Wiegand port
Technical Specification:
| Serial Interface Ports | Controller to controller:RS-485 multi-drop protocol (X*NET2/X*NET3)Optically isolated portUp to 4,000 ft (1,200 m) with 22 gauge, 2 pair, stranded, twisted, and shielded Controller to server:10/100 Ethernet (TCP/IP)Encrypted communication |
| MATCH Protocol | 24V DC nominal |
| Reader Support | MATCH2:MATCH protocolKeypad/reader ports: 8 with 16 device addresses (8 entry and 8 exit)Maximum wiring run: 750 ft (230 m) with 22 gauge or 1,800 ft (550 m) with 18 gauge, 2 pair, stranded, twisted, overall shield Onboard Wiegand:Industry standard WiegandKeypad/reader port: 8 using Mx device address 1 – 8Maximum wiring run: 500 ft (150 m) with 18 gauge, 2 pair, stranded, twisted, overall shield |
| Command and Control Module (CCMx) | • Removable and upgradeable• CCM updates all microprocessors (including onboard MATCH)• Time zones: 150• Door groups: 128• Control zones: 256• Holiday schedules: 4 (366 days x 2 years)• Daylight savings time adjustment |
| Public Private Key Processor and SecureDigital Key Vault | Global platform compatible and secure storage of key material |
| Buffers | • Standard: 1,500 events and 1,500 alarms• MEB/CB128 (reduces users by 20%) or MEB/BE: 20,000 events and 2,000 alarms• If buffer is full, oldest information is discarded first |
| Users | • Standard: 2000 – 4000 (Access Policy Dependent (1))• Memory Expansion Board MEB/CB64: Up to 68,000• Memory Expansion Board MEB/CB128: Up to 132,000 |
| Memory Protection Battery | 30 days for code, setups, clock, and buffers |
| Security | • Enclosure door tamper switch• Key lock |
| Enclosure | NEMA type with conduit knockouts and removable door |
| Dimensions | 18 x 15.25 x 5.5 in (457 x 387 x 140 mm) |
| Weight | 30 lbs (13.6 kg) |
| Expansion Boards | 6 x 4.25 x 0.75 in (152 x 108 x 19 mm) and 1.0 lb (0.45 kg) |
| Operating Temperature Range | 32° to 140°F (0° to 60°C) |
| Relative Humidity | 0 to 90%, non-condensing |
| Keypad/Reader Power (8 Terminals) | • 1.0 Amp at 24VDC each, fused and resettable• 2.9 Amp at 24VDC each• Powers MATCH2 |
| Wiegand Keypad/Reader (8 Terminals) | • 500 mA at 12VDC each, fused and resettable• 2.0 Amp at 12VDc total• Powers standard readers |
| Power Supply | • Switching• 110 – 240 VAC, 50/60, fused |
| Standby Batteries | 7 AH included |
| Door Relays | 5 Amp, form C |
| Alarm Relays | 2 Amp, form C |
| Listings and Approvals | • UL 294: Access Control Systems Units• UL 1076: Proprietary Burglar Alarm Systems |