A high-performance and cost-effective controller-reader module capable of securing single door access. It is configurable for either Wiegand or OSDP.
Product Description:
The PW6101 series controller and reader module is a high performance, Ethernet ready, cost effective system capable of controlling a single opening. The controller and reader module are configurable for either Wiegand or OSDP. PW6K1ICE is a full featured PoE single door access controller with many of the features of higher end controllers. Meanwhile, PW6K1R1E single door PoE reader module supports one door with either a single reader or in/out reader configurations.
Product Features:
PW6K1ICE Controller
- Powered by the network via PoE or standalone power supply
- Supports one doors worth of I/O with IN and OUT readers
- PoE can power all door I/O devices such as readers, door position switch, request-to-exit and door strike
- Sized to be mounted at the door in an appropriate enclosure
- Supports up to 16 PW6K1R1E PoE reader modules on the same network subnet
- Supports up to 32 time zones per panel
- Triggers and procedures support Includes a limited lifetime warranty1 against Hard/ soft/timed anti-passback
PW6K1R1E Reader Module
- Powered by the network via PoE or standalone power supply
- Supports one door of I/O with IN and OUT readers
- PoE can power all door I/O readers, door position, request-to-exit and door strike
- Sized to be mounted at the door in an appropriate enclosure
- The PW6K1R1E can be linked to either a PW6K1ICE or PW6K1IC controller
- Up to 16 PW6K1R1E single door PoE reader modules can be connected to a controller on the same network subnet
Technical Specification:
| MODEL: PW6101 Series | ||
|---|---|---|
| Single Door POE Intelligent Controller and Reader Module | ||
| SPECIFICATIONS | Intelligent Controller | |
| Power Input | PoE power input 12.95 W, compliant to IEEE 802.3af or 12 VDC ±10% 900 mA maximum power supply.Note: For UL installations, PoE-powered devices shall not be used. Power for these devices must be provided by a UL294 listed power limited source (12 VDC). | |
| Power Output | 12 VDC @ 650mA including reader and AUX output | |
| Reader Power Interface | PoE: 12 VDC±10% or local power supply (12 VDC) (PTC limited 150 mA max) | |
| Inputs | 2 general purpose programmable circuit type inputs with dedicated tamper | |
| Outputs | 2 relay Form C, 2A @ 30 VDC reader | |
| Ports | Two TTL reader ports or one 2-wire RS485 reader port capable of supporting two readers | |
| Keypad | Multiplexed with card data | |
| LED | TTL compatible | |
| Buzzer | Only with ‘one-wire’ LED | |
| Dimensions | Without bracket: 5.5″ W x 2.75″ L x 0.96″ H (140 mm x 70 mm x 24 mm) With bracket: 5.5″ W x 3.63″ L x 1.33″ H (140 mm x 92 mm x 34 mm) | |
| Temperature | Operating: 32° to 171 ̊F (0° to 77°C)Storage: -67° to 185 ̊F (-55° to 85°C) | |
| Humidity | 10-95% RHNC | |
| Technical Features | Connectivity Primary Port: 10/100 Ethernet | |
| Door Control | One physical barrier can be controlled using single or paired readers. Two reader ports: magnetic, Wiegand or RS485 (RS485 on one reader port capable of supporting two readers).Two supervised inputs, two relays. Diagnostic LEDs. Dedicated tamper input. | One physical barrier can be controlled using single or paired readers. Two reader ports:magnetic, Wiegand or RS485 (RS485 on one reader port capable of supporting tworeaders). Two supervised inputs, two relays. Diagnostic LEDs. Dedicated tamper input. |
| Access Control | 240,000 cardholders, 50,000 transaction buffer. 12 access levels per cardholder. 19 digit (64-bit) user ID and 15 digit PIN numbers maximum. | |
| Activation/Deactivation Dates | 240,000 cardholders, 50,000 transaction buffer. 12 access levels per cardholder. 19 digit (64-bit) user ID and 15 digit PIN numbers maximum. | |
| Card Formats | 8 active card formats per EP1501. PIV-II, CAC, TWIC card compatible. Anti-passback support nested area, hard, soft, or timed forgiveness. | |
| Alarm Management | Normally open/Normally closed, unsupervised, supervised. Standard or custom end-of-line resistances. | |
| Standards | UL294 Recognized, CE Compliant, ROHS, FCC Part 15 Class A, NIST Certified Encryption | |